Pegasus Entertainment

Lens Cleaner – 16 oz bulk bottle

adminoma — Tue, 27 Mar 2018 20:29:01 +0000

Rosco Lens Cleaner has been the choice of professional cameramen and cinematographers for over 50 years. Its unique formulation is especially designed for cleaning glass lenses, mirrors, dichroic filters, and other fine quality glass optics. It is easy-to-use and fast drying. It quickly removes dirt, residue, smudges and fingerprints. Free of ammonia, detergents and glycerin, it leaves no streaks or residue. Rosco Lens Cleaner is packaged in a pocketsize 2 ounce drip bottle, or in a larger 16 ounce bulk bottle. A new, convenient 8 ounce spray bottle is particularly suited for lighting crews and rental shops, when cleaning lenses and reflectors in moving lights, as well as standard lighting fixtures.

Lens Cleaner – 8 oz. spray bottle

adminoma — Tue, 27 Mar 2018 20:25:04 +0000

Lens Cleaner – 2 oz. drip bottle

adminoma — Tue, 27 Mar 2018 20:19:43 +0000

Flamex WD – Raw Wood – 5 Gallon

adminoma — Fri, 23 Mar 2018 20:29:36 +0000

Using Roscoflamex WD
Roscoflamex WD has been premixed and does not require any further dilution. The method of application and the amount of Roscoflamex WD required for sufficient treatment varies with the materials in use.

Coverage
One gallon of Roscoflamex WD will treat approximately 150-200 square feet (14-18.5 square meters) of material.

Applying Roscoflamex WD

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption. Saturate the material, allow to absorb and then reapply a second treatment.

Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the material. Use a Hudson-type sprayer with a medium nozzle setting. Saturate the material, allow to absorb and then reapply a second treatment.

The absorption rate of the wood or cellulosic materials being used may dramatically affect proper flame retardance. Make sure you test for effective flame retardance.

Certification and Testing
Roscoflamex WD has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class B.

Storage
Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.

Disclaimer
Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.

Roscoflamex WD compares to original W40. Do not intermix old and new Flamex products. Use to treat:

-Plywood
-Luan
-Pine boards
-Hardwood
-Homosote
-Hay bales
-Masonite™
-MDF™

Flamex WD – Raw Wood – Gallon

adminoma — Fri, 23 Mar 2018 20:27:02 +0000

Coverage
One gallon of Roscoflamex WD will treat approximately 150-200 square feet (14-18.5 square meters) of material.

Applying Roscoflamex WD

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

The absorption rate of the wood or cellulosic materials being used may dramatically affect proper flame retardance. Make sure you test for effective flame retardance.

Certification and Testing
Roscoflamex WD has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class B.

Roscoflamex WD compares to original W40. Do not intermix old and new Flamex products. Use to treat:

-Plywood
-Luan
-Pine boards
-Hardwood
-Homosote
-Hay bales
-Masonite™
-MDF™

Flamex SF – Synthetic Fiber – 5 Gallon

adminoma — Fri, 23 Mar 2018 20:21:05 +0000

Using Roscoflamex SF
Roscoflamex SF has been premixed and does not require any further dilution. The method of application and the amount of Roscoflamex SF required for sufficient treatment varies with the fabrics in use.

Coverage
One gallon of Roscoflamex SF will treat approximately 500 square feet (46.4 square meters) of fabric.

Applying Roscoflamex SF

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.

Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample.

Over saturating the fabric may cause it to stiffen or otherwise alter its hand. ALWAYS treat a test sample to determine how the fabric will react and to test for effective flame retardance.

Certification and Testing
Roscoflamex SF has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701.

Roscoflamex SF compares to original S33. Do not intermix old and new Flamex products. Use to treat:

-Nylons
-Polyesters
-Acrylics
-Poly-cotton blends
-Synthetic velours or felts

Flamex SF – Synthetic Fiber – Gallon

adminoma — Fri, 23 Mar 2018 20:18:03 +0000

Coverage
One gallon of Roscoflamex SF will treat approximately 500 square feet (46.4 square meters) of fabric.

Applying Roscoflamex SF

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.

Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample.

Over saturating the fabric may cause it to stiffen or otherwise alter its hand. ALWAYS treat a test sample to determine how the fabric will react and to test for effective flame retardance.

Certification and Testing
Roscoflamex SF has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701.

Roscoflamex SF compares to original S33. Do not intermix old and new Flamex products. Use to treat:

-Nylons
-Polyesters
-Acrylics
-Poly-cotton blends
-Synthetic velours or felts

Flamex PC – Paper & Cardboard – 5 Gallon

adminoma — Fri, 23 Mar 2018 20:07:01 +0000

Using Roscoflamex PC
Roscoflamex PC has been premixed and does not require any further dilution. The method of application and the amount of Roscoflamex PC required for sufficient treatment varies with the materials in use. Some discoloration and wrinkling of paper products may occur as the paper materials dry. Multiple light treatments will minimize this.

Coverage
One gallon of Roscoflamex PC will treat approximately 400 square feet (37 square meters) of fabric.

Applying Roscoflamex PC

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.

Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample.

Over saturating the fabric may cause it to stiffen or otherwise alter its hand. ALWAYS treat a test sample to determine how the fabric will react and to test for effective flame retardance.

Certification and Testing
Roscoflamex PC has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701.

Roscoflamex PC is a new formulation designed to effectively treat paper and cardboard products used in props and scenery. Do not intermix old and new Flamex products. Use to treat:

-Letters
-Copier paper
-Newspapers and magazines
-Paper trash and packaging
-Cardboard boxes
-Matte board

Flamex PC – Paper & Cardboard – Gallon

adminoma — Fri, 23 Mar 2018 20:02:01 +0000

Coverage
One gallon of Roscoflamex PC will treat approximately 400 square feet (37 square meters) of fabric.

Applying Roscoflamex PC

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.

Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample.

Over saturating the fabric may cause it to stiffen or otherwise alter its hand. ALWAYS treat a test sample to determine how the fabric will react and to test for effective flame retardance.

Certification and Testing
Roscoflamex PC has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701.

Roscoflamex PC is a new formulation designed to effectively treat paper and cardboard products used in props and scenery. Do not intermix old and new Flamex products. Use to treat:

-Letters
-Copier paper
-Newspapers and magazines
-Paper trash and packaging
-Cardboard boxes
-Matte board

Flamex PA – Latex Paint Additive – 12 x 8 oz.

adminoma — Fri, 23 Mar 2018 19:57:32 +0000

Using Roscoflamex PA
Roscoflamex PA has been pre-measured and should be added to a single US Gallon (3.79L) of paint. Once combined, the paint/Flamex mixture can be diluted as desired but the dry paint film must be no less than 4 mil in thickness. The effectiveness of a fire retardant barrier is dependent on both the fire retardant additive and the thickness of the coating. Roscoflamex PA is not intended to be used in place of other Roscoflamex products. Where possible, always treat the substrate material using the appropriate Roscoflamex product.

Note: When using Roscoflamex PA in Rosco Supersaturated paint add one 8 oz. jar to one quart of undiluted Supersaturated and then dilute this mixture at least 1:1 with water. Mix thoroughly before using.

Coverage
8 oz. of Roscoflamex PA mixed into one gallon of paint will treat approximately 300 square feet (28 square meters) of material as per paint manufacturer’s guidelines.

Applying Roscoflamex PA

Apply treated paint by brush, roller or sprayer as per the paint manufacturer’s instructions. Regardless of the method of application, it is vital that a complete paint film is formed and that the dry film thickness of the finished coating is not less than 4 mil. Paint films that are incomplete, or are too thin, will not provide a barrier against the spread of fire.

Certification and Testing
Roscoflamex PA has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class A.

Roscoflamex PA compares to original P50. Do not intermix old and new Flamex products. Use to treat:

-Latex house paint
-Tinted latex paints
-Latex primers
-Rosco Scenic paints
-Clear Flat or Gloss Acrylic Glazes
-Vinyl and Acrylic water based mural paints